ZUPAYIPA 400mm x 210mm x 0.5mm Silicone Thermal Pad for CPU GPU Heatsink


ZUPAYIPA 8541607608 - Zupayipa:thickness : 05mm/002''. Zupayipa:size : 40 x 21cm/15. 7'' x 8. 1'' l*w, weight : 103g. Zupayipa products sold. Used for graphics cards, graphic chips and CPU chips. The thermal pad can lower greatly CPU temperature and solve most of the laptop heatsink problem. Zupayipa:product name : CPU Thermal Pad;Material : Silicone.

ZUPAYIPA 400mm x 210mm x 0.5mm Silicone Thermal Pad for CPU GPU Heatsink - Zupayipa:package content : 1 x CPU Thermal Pad.

More information about ZUPAYIPA 8541607608

Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament Genuine Capricorn Premium Tubing


Capricorn - When printing flixible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print. It was developed specifically for 1. 75mm filament with an extremely precise internal diameter. Id: 1. 95mm ± 005mm. Capricorn xs bowden tubing is enhanced with a proprietary blend of high performance additives.

Length: 1 Meter. Od: 4. 0mm. Brand: capricorn length: 1 Meter ID: 1. 95mm ± 005mm od: 4. 0mm brand: Capricorn.

More information about Capricorn


Similar products



GO-3D PRINT 220mm x 220mm Borosilicate Glass Plate/Bed w/Corner Cut for Wanhan i3 Anet A8 MP Maker Select 3D Printer


GO-3D PRINT - Od: 4. 0mm. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Id: 1. 95mm ± 005mm. Length: 1 Meter. Designed by gO-3D Print in California. Glass is a universal print surface for 3D Printing.

. Size: 220mm x 220mm x 3mm w/ corner cut. Size: 220mm x 220mm x 3mm w/ corner cut, good fit Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers Brand: Capricorn. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Flat polished Edge for safe to handle.

GO-3D PRINT 220mm x 220mm Borosilicate Glass Plate/Bed w/Corner Cut for Wanhan i3 Anet A8 MP Maker Select 3D Printer - Almost all types of filament will print to glass in one way or another. Good fit wanhao duplicator i3 Anet A8 MP Maker Select 3D Printers. For nylon, we've found a light coating of uhu glue stick seems to do the trick! If you don't yet have a glass surface, you'll want this one! This glass has been specially ordered and modified for use in 3D Printers.

This type of glass is not available at your local hardware store or big box home center.

More information about GO-3D PRINT


Similar products



Signstek 3D Printer MK2 MK3 Heated Bed Tempered Borosilicate Glass Plate 213x200x3mm


Signstek A011 - Od: 4. 0mm. Size: 213mm x 200mm x 3mm package includes: 1 x Smart glass Please note: The other products show in the picture are not included! Brand: Capricorn. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Flat polished Edge for safe to handle.

Id: 1. 95mm ± 005mm. Length: 1 Meter. Size: 220mm x 220mm x 3mm w/ corner cut. Material: Silicon glass. Designed by gO-3D Print in California. Tempered silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. High binding power when heating, easy to separate the plastic parts when cooling.

Signstek 3D Printer MK2 MK3 Heated Bed Tempered Borosilicate Glass Plate 213x200x3mm - Good fit wanhao duplicator i3 Anet A8 MP Maker Select 3D Printers. Get you out of the trouble when plastic film decreased viscosity after a period of usage. If you want to make your printing platform flat enough, ideal stuff is glass sheet. After cracking a few sheets of normal glass from rapidly cooling or heating, tempered glass will quell your frustrations.

Avoid replacing plastic film. Made from tempered with high transparence.

More information about Signstek A011


Similar products



GO-3D PRINT 130mm x 160mm Borosilicate Glass Plate Bed Flat Polished Edge w/Corners Cut for Monoprice MP Select Mini 3D Print


GO-3D PRINT - High binding power when heating, easy to separate the plastic parts when cooling. Fit monoprice mp select mini / pro 3d printer, malyan M200 w/ Corners Cut for the Leveling Screws, flat Polished Edge for safe to handle. Size: 220mm x 220mm x 3mm w/ corner cut. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.

Flat polished Edge for safe to handle. Designed by gO-3D Print in California. Designed by gO-3D Print in California. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Size: 130mm x 160mm x 3mm w/ Corners Cut. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.

GO-3D PRINT 130mm x 160mm Borosilicate Glass Plate Bed Flat Polished Edge w/Corners Cut for Monoprice MP Select Mini 3D Print - Be sure to print your Z Spacer for our 3mm Borosilicate Glass Bed. This type of glass is not available at your local hardware store or big box home center. Od: 4. 0mm. Almost all types of filament will print to glass in one way or another. Avoid replacing plastic film.

More information about GO-3D PRINT


Similar products



10 Pack - FYSETC 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling


Fuyuansheng - Good fit wanhao duplicator i3 Anet A8 MP Maker Select 3D Printers. Designed by gO-3D Print in California. Package includes: 10 Pcs Die Spring Brand: Capricorn. Size: 130mm x 160mm x 3mm w/ Corners Cut. Id: 1. 95mm ± 005mm. Rectangular Section, strong, keeps print bed level better. After sales guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or QA us, we will try our best to service you.

. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Be sure to print your Z Spacer for our 3mm Borosilicate Glass Bed. High binding power when heating, easy to separate the plastic parts when cooling. Feature: loading grade : light Load Material : Metal Die springs are primarily used in die machinery.

10 Pack - FYSETC 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling - For die springs, yellow color here represents that the loading grade is light load. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Flat polished Edge for safe to handle. Die spring: compatible with most 3d printer bed, great ender 3/2 TronXY X5S heat bed springs, flat top and stiffer;Note: The length of it is 20mm which is not suitable for CR10 series products.

Designed by gO-3D Print in California.

More information about Fuyuansheng


Similar products



ANTCLABS BLTouch : Auto Bed Leveling Sensor/To be a Premium 3D Printer With 1M Extension Cable Set


ANTCLABS - To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Flat polished Edge for safe to handle. Gathering information and firmware setting will be an easy task, because BLTouch works as usual auto bed leveling sensor. Self-test: the push pin is operated three times to test when the power is on.

Alarm: the led light blinks if a problem found on a self-test or on an operation. High-precision: blTouch's Standard Deviation in repeatability is around 0005mm. We statement: about the product Spring, other sellers are fake, we only sold on Fuyuansheng shop, thanks for your understanding. Hole diameter od : 0

ANTCLABS BLTouch : Auto Bed Leveling Sensor/To be a Premium 3D Printer With 1M Extension Cable Set - 31"/ 8mm; rod diameter inner Dia: 016"/ 4mm; length: 08"/ 20mm. Thus, bltouch can be applied on almost every board. Bltouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor, alarm release, alarm, and aimed user convenience and enjoyable printing by adding many smart functions, self-test, test mode for M119.

Features:simple: bltouch can be easily applied, since it has a small and simple structure. Od: 4.

More information about ANTCLABS


Similar products



LANMU Micro SD to SD Card Extension Cable Adapter Flexible Extender SD/RS-MMC/SDHC/MMC for Monoprice Select Mini 3D Printer/Anet A8 3D Printer/Raspberry Pi/GPS/TV


Lanmu Direct COMINHKPR105510 - Made from tempered with high transparence. Material: Silicon glass. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Be sure to print your Z Spacer for our 3mm Borosilicate Glass Bed. Designed by gO-3D Print in California. Avoid replacing plastic film.

Fit monoprice mp select mini / pro 3d printer, malyan M200 w/ Corners Cut for the Leveling Screws, flat Polished Edge for safe to handle. Good fit wanhao duplicator i3 Anet A8 MP Maker Select 3D Printers. Length: 1 Meter. Support the card 32G, make navigation upgrade more convenient. Compatible with gps, dvd, dvr, leD/LCD screen, or mobile phone Smartphone.

LANMU Micro SD to SD Card Extension Cable Adapter Flexible Extender SD/RS-MMC/SDHC/MMC for Monoprice Select Mini 3D Printer/Anet A8 3D Printer/Raspberry Pi/GPS/TV - Read and write speed will not affect. Size: 130mm x 160mm x 3mm w/ Corners Cut. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Flat polished Edge for safe to handle. High binding power when heating, easy to separate the plastic parts when cooling.

Package includes: 1 X Micro SD Card Adapter.

More information about Lanmu Direct COMINHKPR105510


Similar products



HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black


HATCHBOX 3D PLA-1KG1.75-BLK - Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. Good fit wanhao duplicator i3 Anet A8 MP Maker Select 3D Printers. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F.

Die spring: compatible with most 3d printer bed, great ender 3/2 TronXY X5S heat bed springs, flat top and stiffer;Note: The length of it is 20mm which is not suitable for CR10 series products. Fit monoprice mp select mini / pro 3d printer, malyan M200 w/ Corners Cut for the Leveling Screws, flat Polished Edge for safe to handle.

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black - Designed by gO-3D Print in California. High binding power when heating, easy to separate the plastic parts when cooling. Support the card 32G, make navigation upgrade more convenient. Compatible with gps, leD/LCD screen, dvr, dvd, or mobile phone Smartphone. Read and write speed will not affect. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.

Flat polished Edge for safe to handle. Brand: Capricorn. Length: 1 Meter.

More information about HATCHBOX 3D PLA-1KG1.75-BLK


Similar products



Gizmo Dorks PEI Sheet 3D Printer Build Surface 235mm x 235mm 9.3" x 9.3" with Preapplied Laminated 3M 468MP Adhesive for Creality Ender 3 or CR 20 | Made in The USA


Gizmo Dorks - Build surface - pei is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints or with acetone on a COLD bed. To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Be sure to print your Z Spacer for our 3mm Borosilicate Glass Bed.

We statement: about the product Spring, we only sold on Fuyuansheng shop, other sellers are fake, thanks for your understanding. Hole diameter od : 031"/ 8mm; rod diameter inner Dia: 016"/ 4mm; length: 08"/ 20mm. 1 kg approximately 2. 20 lbs Spool. Level the bed and set the height of the nozzle before printing.

Gizmo Dorks PEI Sheet 3D Printer Build Surface 235mm x 235mm 9.3" x 9.3" with Preapplied Laminated 3M 468MP Adhesive for Creality Ender 3 or CR 20 | Made in The USA - If pei is installed to the top surface of a bed sandwich a build plate with multiple layers, it is recommended to install PEI on top of borosilicate glass. Useheat the bed to the desired temperatures for printing 60 C for PLA and 100 C for ABS. Please use a towel to avoid getting burned. Rectangular Section, strong, keeps print bed level better.

After sales guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or QA us, we will try our best to service you.

More information about Gizmo Dorks


Similar products



XCSOURCE 10pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE585


XCSOURCE TE585 - To print with abs or pla, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Be sure to print your Z Spacer for our 3mm Borosilicate Glass Bed. Bubble free application - the 3m 468mp adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed.

XCSOURCE 10pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE585 - High binding power when heating, easy to separate the plastic parts when cooling. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Retains voltage input wiring pads, convenient for DIY. This module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports.

With led indicators, easily read the charging status. 25 x 19mm. It can be used for voltage 3. 6, 3. 7v, etc. Made from tempered with high transparence. Dimensions: 235 x 235mm / pei thickness: 056mm 0022 inches / laminated 3m 468mp adhesive thickness: 0

More information about XCSOURCE TE585


Similar products