Top 10 Byrd Shelix Cutterhead – Power Planer Knives

As an Amazon Associate I earn from qualifying purchases.

1. Byrd Tool

#ad

Byrd Tool OEM Shelix cutterhead for Dewalt planer DW735

#adByrd Tool #ad - Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.

Helical insert knife configuration breaks up chips, making dust collection easier. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place. Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade; comes with 5 replacement inserts. This dw735 oem cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. Made in the USA! .

Brand	Byrd Tool #ad
Manufacturer	Byrd #ad
Height	15.6 Inches
Part Number	Dewalt P131519-1/B

2. Grizzly

#ad

Grizzly H7764 Byrd Tool 6-Inch Shelix Cutterhead

#adGrizzly #ad - The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest. Comes with all 30 inserts on the cutterhead, plus 5 extras. Made in the usa by byrd, these indexable carbide insert cutterheads are very well made and leave a great finish.

Brand	Grizzly #ad
Manufacturer	Grizzly #ad
Height	4 Inches
Length	5.75 Inches
Weight	8.8 Pounds
Width	13 Inches
Part Number	H7764
Model	H7764

3. Byrd Tool

#ad

Byrd Tool Shelix cutterhead for Dewalt planer DW735

#adByrd Tool #ad - Spiraled to break up chips for dust collection, shear to give clean cutting actionTrue helical cut slices the wood which greatly reduces noise and tearoutPocket for cutters makes replacing them easy and creates perfect alignment. Cutterhead diameter is 0 . 088" roughly 1/16 in smaller than the original oem head to allow for installation without removing the carbide insertsC3 carbide cutters lasts an average of 10 times longer per side 4 sides = 40x than traditional steel knives.

Brand	Byrd Tool #ad
Manufacturer	Byrd Tool #ad
Height	15.6 Inches
Length	3 Inches
Weight	7 Pounds
Width	4 Inches
Part Number	P131518/B
Model	Dewalt DW-735

4. Byrd Tool

#ad

Byrd Tool H7769, 20" Shelix Cutterhead

#adByrd Tool #ad - Each cutter head comes with included inserts plus 5 extras. The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest. Made in the usa by byrd these indexable carbide insert cutter heads are very well made and leave a great finish.

Brand	Byrd Tool #ad
Manufacturer	Byrd Tool #ad
Height	6 Inches
Length	6 Inches
Width	31.25 Inches
Part Number	H7769
Model	H7769

5. JTEX

#ad

15mmx15mmx2.5mm R100 4" Radius Carbide Inserts Cutters For Byrd Shelix Cutterheads For Dewalt DW735 DW735X, Grizzly H9893 H7354-10 Pack

#adJTEX #ad - 15mmx15mmx2. 5mm r100 4" radius carbide inserts cutters for byrd Shelix Cutterheads For Dewalt DW735 DW735X, Grizzly H9893 H7354. Package with -10 Pack Carbide Inserts Blades. Easy to replace your jointers and planers, excellent accessory for wood turning work. Made of solid tungsten carbide, providing you a better experience and durable use. 4-cutting edge15mmx15mmx2. 5mm all are of the same sharpness. 15mm square straight carbide insert, Designed for numerous spiral/helical planer cutter head system, wood lathe Tools.

Brand	JTEX #ad
Manufacturer	JTEX #ad

6. Byrd Tool

#ad

Fits Byrd Cutterheads, Box of 10, Shelix Carbide Inserts, 15mm x 15mm x 2.5mm

#adByrd Tool #ad - Insert and cutterhead design greatly reduce tearout. Box of 10100mm face radius. Made in the USA! Long-lasting solid carbide byrd SHELIX OEM inserts 1. 5mm square x 2. 5mm thick.

Brand	Byrd Tool #ad
Manufacturer	Byrd #ad
Height	2.4 Inches
Length	0.9 Inches
Width	0.5 Inches
Part Number	IC-2515154-4100
Model	IC-2515154-4100

7. TJATSE

#ad

10 Packs with Screws, TJATSE 15x15x2.5mm R100-81° Carbide Inserts Byrd Shelix Cutterhead Replacement Cutters with 4" Edge Radius

#adTJATSE #ad - Carbide inserts application:these indexable carbide inserts fit for byrd shelix spiral/helical planer cutter heads, or full-size wood lathe turning rougher. What you get:packs of 10 15 x 15 x 2. 5mm r100 square replacement carbide cutters, our worry-free 12-month warranty, 10 pcs of professional M6 screws, and friendly customer service.

Smooth finish:our inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, they can produce a superior finish and is much quieter during operation. Size of carbide cutter: industry standard 15mml x 15mmw x 2. 5mmtwith 4" face radius R100mm, 30 degree cutting bevel. Tjatse committed to give Best Selection for your woodworking job.

They are sharpness, stability, durable and long-lasting inserts you can count on over time. Affordable and durable: tjatse carbide inserts made by k10 grade solid tungsten carbide, double life-time than general carbide cutters, and increased 30% hardness. Offers quick, efficient cuts. Each insert can be rotated up to three times to expose a new sharp edge, 4 indexable cutting edges, no more changing and resetting knives every time a blade gets dull.

Brand	TJATSE #ad
Manufacturer	TJATSE #ad
Part Number	TS-WT151525-R100
Model	TS-WT151525-R100

8. WOODCRAFT

#ad

10 Pack, Replacement Carbide Inserts for Byrd Shelix Cutterheads

#adWOODCRAFT #ad - Woodcraft is america’s leading supplier of saws, pinnacle, videos, routers, sanding, power tools, kits, Highpoint, hand tools, wood stain and paint, wood, planes, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, dust collection and more.15mm x 15mm x 2. 5mm. Specifically designed to fit all JET and Powermatic jointers and planers that utilize the Byrd Shelix cutterhead. Has a rockwell hardness of 92. 1 – 92. 6 - sharpened on four sides. Made in Germany. Our award winning family of brands includes WoodRiver, and plans.

Brand	WOODCRAFT #ad
Manufacturer	Tigra USA Inc. #ad
Height	0.85 Inches
Length	0.95 Inches
Weight	0.14 Pounds
Width	2.6 Inches
Part Number	113993

9. DL TOOLS

#ad

DLtools 15mm Byrd Shelix Carbide Insert Cutters with 4 Inch Edge Radius 15mm X15mm X2.5mm-R100-81° for Shelix Woodworking Planer CutterHead,10pcs

#adDL TOOLS #ad - 81 degree. The square inserts with 4 indexable sharp edges and radius corner, make the wood cutting safer and cleaner. Suitable for work on general purpose wood, MDF/HDF. When one side is dull, plywood, chipboard, you can rotate to a new razor edge. Made of solid tungsten carbide, sharp and durable, perfect for shelix BYRD cutterheads. Perfect for rough the wood surface and for general wood turning applications. 15mm（width）x15lengthx2. 5mmthickness 4 edges carbide inserts with 4 inch edge radius, countersink mounting hole at std.

Brand	DL TOOLS #ad
Manufacturer	DLdesign #ad
Height	0.1 Inches
Length	0.59 Inches
Width	0.59 Inches
Part Number	CI15BYRD
Model	Byrd-CI01

10. Oliver

#ad

22” Planer with Byrd Shelix Cutterhead 7.5HP, 1Ph, 4455.103.B

#adOliver #ad - Byrd shelix carbide inserts are indexed for quick changing. Hinged access to cutter head and feed rollers for quick set-up. Massive cast iron construction throughout. Easy access to motor, drive train, and gearbox assist in maintenance and adjustment. Polished built-in table roller assists movement of rough stock.

Brand	Oliver #ad
Manufacturer	OLIVER #ad
Height	50 Inches
Length	45 Inches
Weight	1550 Pounds
Width	32 Inches
Part Number	4455.103B
Model	4455.103B