The Hillman Group 42111 Metric Hex Nut M8, 1.25-Inch, 30-Pack

#ad
#ad
The Hillman Group 42111 #ad - The Hillman Group 42111 Metric Hex Nut M8, 1.25-Inch, 30-Pack #ad - Zinc Plated. Hex nuts are for general applications and are used with bolts and washers of the same finish. The most commonly used nut, they are often found in deck and fence building. Use with bolts of the same finish and threading for proper fit. The called out size is the inner diameter and the number of threads per inch or thread pitch.

Hex nuts are for general applications and are used with bolts and washers of the same finish.

More information about The Hillman Group 42111 #ad

18-8 Stainless Steel Fully Threaded Rod, Meets DIN 975, M8-1.25 Thread Size, 1 m Length, Right Hand Threads

#ad
#ad
Small Parts #ad - Both have threads along part or all of their length. 18-8 stainless steel for corrosion resistance. The material may be slightly magnetic. Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. Meets din 975 specifications. Studs are also available with a perforated base, weld projections, or a press-in captive head for securing to the surface of a component.

18-8 Stainless Steel Fully Threaded Rod, Meets DIN 975, M8-1.25 Thread Size, 1 m Length, Right Hand Threads #ad - This fully threaded rod is made of 18-8 stainless steel for corrosion resistance, has M8-1. 25 right-hand threads, and is 1 m long. Fully threaded rod. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long. Those that are partially threaded have equal or unequal thread lengths on one or both ends.

It meets deutsches institut für Normung DIN 975 specifications.

More information about Small Parts #ad


Similar products



Steel Flat Washer, Zinc Plated Finish, DIN 125, Metric, M8 Screw Size, 8.4 mm ID, 16 mm OD, 1.6 mm Thick Pack of 100

#ad
#ad
Small Parts M8D125A #ad - Several different washer styles fit a variety of application and installation requirements. The steel flat washer has a zinc plated finish and meets Deutsches Institut für Normung DIN 125 specifications. The zinc plating offers corrosion resistance and has a reflective appearance. Washers distribute the load of a fastener across a surface and can also be used as spacers, shims, springs, or locking devices.

Fully threaded rod. Meets din 125 specifications. Steel is often used in applications where strength is the primary consideration. The most common style is a flat washer. Flat washer provides a bearing surface for fastener load distribution or acts as a spacer. Meets din 975 specifications. Zinc plating resists corrosion and has a reflective appearance.

Steel Flat Washer, Zinc Plated Finish, DIN 125, Metric, M8 Screw Size, 8.4 mm ID, 16 mm OD, 1.6 mm Thick Pack of 100 #ad - Steel is often used in applications where strength is the primary consideration. A cup washer, helps protect fasteners from electrical currents, for example, while a lock washer offers additional security in an assembled workpiece. More specialized washers provide additional benefits. The flat washer provides a bearing surface for fastener load distribution or is used as a spacer between components.

More information about Small Parts M8D125A #ad


Similar products



The Hillman Group 1432 M10-1.50 - Metric Hex Nut 20-Pack

#ad
#ad
The Hillman Group 1432 #ad - Meets din 125 specifications. Steel is often used in applications where strength is the primary consideration. Flat washer provides a bearing surface for fastener load distribution or acts as a spacer. The called out size is the inner diameter and the number of threads per inch or thread pitch. 18-8 stainless steel for corrosion resistance.

These hex nuts are internally threaded and have a hex drive for nearly all general applications. Hex nuts are for general applications and are used with bolts and washers of the same finish. Steel/Zinc Plated. Fully threaded rod. Meets din 975 specifications. The most commonly used nut, they are often found in deck and fence building.

The Hillman Group 1432 M10-1.50 - Metric Hex Nut 20-Pack #ad - Zinc plating resists corrosion and has a reflective appearance. Can be used with any fastener with a machine screw thread.

More information about The Hillman Group 1432 #ad


Similar products



20-Pack 608 ZZ Ball Bearings , 608zz Metal Double Shielded Miniature Deep Groove Skateboard Ball Bearings 8mm x 22mm x 7mm

#ad
#ad
PAGOW 608 #ad - Fully threaded rod. 18-8 stainless steel for corrosion resistance. Package included: 20pcs 608zz bearings. Flat washer provides a bearing surface for fastener load distribution or acts as a spacer. Meets din 975 specifications. Can be used with any fastener with a machine screw thread. Meets din 125 specifications.

20-Pack 608 ZZ Ball Bearings , 608zz Metal Double Shielded Miniature Deep Groove Skateboard Ball Bearings 8mm x 22mm x 7mm #ad - . Pagow 608zz bearings: single-row bearing for supporting radial and axial loads. Shields on both sides keeping lubricant in and contaminants out. Material: carbon steel, durability and resistance to deformity under heavy loads. Zinc plating resists corrosion and has a reflective appearance. These hex nuts are internally threaded and have a hex drive for nearly all general applications.

34, 000 rpm limit with grease lubrication. It's suitable for use in skateboards, scooters, inline skates, and other skating applications. Package included: 20pcs 608zz bearings. Steel/Zinc Plated. Steel is often used in applications where strength is the primary consideration.

More information about PAGOW 608 #ad


Similar products



AmazonBasics PETG 3D Printer Filament, 1.75mm, Black, 1 kg Spool

#ad
#ad
AmazonBasics AMG1051752-10 #ad - Steel is often used in applications where strength is the primary consideration. Meets din 975 specifications. An amazon Brand. Zinc plating resists corrosion and has a reflective appearance. Engineered to reduce jamming; resealable storage bag included to protect filament between use. Measures 9. 2 by 8. 3 by 3 inches lxwxh; weighs 2.

2 pounds; backed by an AmazonBasics 1-year limited warranty. These hex nuts are internally threaded and have a hex drive for nearly all general applications. Can be used with any fastener with a machine screw thread. Flat washer provides a bearing surface for fastener load distribution or acts as a spacer. Meets din 125 specifications.

AmazonBasics PETG 3D Printer Filament, 1.75mm, Black, 1 kg Spool #ad - 34, 000 rpm limit with grease lubrication. It's suitable for use in skateboards, inline skates, scooters, and other skating applications. Package included: 20pcs 608zz bearings. 3d printer filament with 1. 75 mm diameter + / -. 05 mm; designed to fit most common 3D printers check spool size for compatibility; Black; 1 kg spool.

More information about AmazonBasics AMG1051752-10 #ad


Similar products



3D Solutech See Through Red 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS 1.0KG

#ad
#ad
3D Solutech 3DSPLA175STRED #ad - Steel/Zinc Plated. Engineered to reduce jamming; resealable storage bag included to protect filament between use. Can be used with any fastener with a machine screw thread. Measures 9. 2 by 8. 3 by 3 inches lxwxh; weighs 2. 2 pounds; backed by an AmazonBasics 1-year limited warranty. Flat washer provides a bearing surface for fastener load distribution or acts as a spacer.

Our filament is always round, air bubbles, and contains no oily residue, kinks or breaks.18-8 stainless steel for corrosion resistance. Meets din 125 specifications. Package includes: 1 x 1. 75mm see through Red PLA filament 2. 2lbs 1 x filament clip. Steel is often used in applications where strength is the primary consideration.

3D Solutech See Through Red 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS 1.0KG #ad - These hex nuts are internally threaded and have a hex drive for nearly all general applications. 1. 75mm see through Red PLA filament. Vacuum sealed we use vacuum-sealed packaging to isolate the moisturized environment and filament, and provide the best performance possible. High compatibility our filaments have been tested on various 3d printer brands, receiving widespread and positive customer feedback.

More information about 3D Solutech 3DSPLA175STRED #ad


Similar products



eSUN 3D Printer CLEANING Filament 1.75mm Natural 0.1kg for all 1.75mm FDM 3D Printers, 1.75mm Cleaning

#ad
#ad
eSUN CLN175N01 #ad - These hex nuts are internally threaded and have a hex drive for nearly all general applications. Steel/Zinc Plated. Excellent heat stability. Meets din 975 specifications. 34, 000 rpm limit with grease lubrication. It's suitable for use in skateboards, inline skates, scooters, and other skating applications. Package included: 20pcs 608zz bearings.

3d printer filament with 1. 75 mm diameter + / -. 05 mm; designed to fit most common 3D printers check spool size for compatibility; Black; 1 kg spool. Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius. Cleans the extruder's interior by removing accumulated residual filaments. Possesses a certain level of adhesive quality.

eSUN 3D Printer CLEANING Filament 1.75mm Natural 0.1kg for all 1.75mm FDM 3D Printers, 1.75mm Cleaning #ad - Measures 9. 2 by 8. 3 by 3 inches lxwxh; weighs 2. 2 pounds; backed by an AmazonBasics 1-year limited warranty. For common 3d printers such as makerbot, up, sol doodle 2, Reprap, Printrbot LC, Mendel, flash forge, afinia, Maker Gear M2 and etc. Backed by our 100% satisfaction GUARANTEE. Temperature range is 190°C - 220°C.

More information about eSUN CLN175N01 #ad


Similar products



HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow

#ad
#ad
HATCHBOX 3D PLA-1KG1.75-YLW #ad - 2 how do i store my filament? a: most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. If printing with abs and the print will still not stick to the build platform you can use "*ABS Sludge" a little goes a long way. 34, 000 rpm limit with grease lubrication.

It's suitable for use in skateboards, scooters, inline skates, and other skating applications. Package included: 20pcs 608zz bearings. 3d printer filament with 1. 75 mm diameter + / -. 05 mm; designed to fit most common 3D printers check spool size for compatibility; Black; 1 kg spool. Meets din 125 specifications.

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow #ad - Fully threaded rod. Second, for pla it's recommended to use blue painters tape and ABS it's recommended to use kapton tape. The filaments are universally designed and compatible with 3D Printers using 1. 75mm diameter filament, with a dimensional accuracy of +/- 005mm. When creating the abs sludge mixture of acetone and ABS scraps, create the mixture in well ventilated area preferably outside.

Please note this will vary with each 3D printer.

More information about HATCHBOX 3D PLA-1KG1.75-YLW #ad


Similar products



Genuine E3D Thermistor Cartridge E-SEMITEC-50-MOLEX

#ad
#ad
E3D #ad - Temperature range is 190°C - 220°C. Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 1. 25". Makes it easy to disconnect your entire HotEnd without the need for re-wiring. Steel/Zinc Plated. Using e3d's proven semitec 104gt thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive.

Genuine E3D Thermistor Cartridge E-SEMITEC-50-MOLEX #ad - These hex nuts are internally threaded and have a hex drive for nearly all general applications. A custom made thermistor encapsulated into an easy to use cartridge package. Fully threaded rod. Zinc plating resists corrosion and has a reflective appearance. Meets din 125 specifications. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F.

A cable for connecting the thermistor to the board is also included. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Will not clog extruder. Clean the 3d printer's extruder before and after printing for better extruder protection.

More information about E3D #ad


Similar products



M3 Stainless Steel Hex Socket Head Cap Screws Nuts Assortment Kit, Allen Wrench Drive, Precise Metric Bolts and Nuts Set with Beautiful Assortment Tool Box for 3D Printed Project, 310 Pcs Silver

#ad
#ad
Shenzhen Baishichuangyou Technology co.Ltd. #ad - Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Our screws and nuts accord with standardized metric system. Good storage and assortment useful assortment - and come on a very nice case. And the compact thread is not easy to out of shape and slid in the process of rolling. Terminated with a Molex Microfit 3.

0 connector. Wide application xool m3 hex socket head cap screws nuts are great for professionals, construction, amateurs, hvac and so on. They have superior rust resistance and the excellent of oxidation resistance, cold weather, which can ensure long time using. Safety and sweet our m3 cap head screw adopts high quality material, which is environmental protection and non-poisonous.

M3 Stainless Steel Hex Socket Head Cap Screws Nuts Assortment Kit, Allen Wrench Drive, Precise Metric Bolts and Nuts Set with Beautiful Assortment Tool Box for 3D Printed Project, 310 Pcs Silver #ad - Measures 9. 2 by 8. 3 by 3 inches lxwxh; weighs 2. 2 pounds; backed by an AmazonBasics 1-year limited warranty. 1. 75mm see through Red PLA filament. They also worked well for 3D printed projects. Our kit contains 6 m3 popular sizes: m3 x 20 30pcs, m3 x 16 30pcs, m3 x 12 30pcs, M3 X 8 30pcs, M3 X 6 30pcs and M3 Nuts 160pcs.

More information about Shenzhen Baishichuangyou Technology co.Ltd. #ad


Similar products