2-1/2″ Dial – PneumaticPlus LFSB25-200 Liquid Filled Pressure Gauge WOG- 1/4″ NPT Back Mount – 0 to 200 PSI

#ad
#ad
PneumaticPlus #ad - Phosphor Bronze Bourdon Tube. Brass internals & 1/4" NPT Back Mount Connection. Dial size: 2-1/2" 2. 5". Suitable for air, water, oil & gas; dual scale psi/kpa; ambient -30F to 160F; Accuracy: 3-2-3%; ANSE401 compliant. Dual scale psi/bar, Stainless Steel Case & Bezel. Liquid filled lubricates the gauge movement keeping the Contaminates Dirt Away, Extending the Life of the Gauge Pressure range: 0 - 200 PSI.

More information about PneumaticPlus #ad

Control Devices ST Series Brass ASME Safety Valve, 150 psi Set Pressure, 1/4" Male NPT

#ad
#ad
Control Devices ST25-1A150 #ad - Relief pressure preset to 150 psi with flow rate of 136 cfm. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates.

They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation. Control devices manufactures valves and other flow control devices.

1/4" male npT threaded inlet connection. This safety valve is american society of Mechanical Engineers ASME safety rated and displays the UV mark for pressure vessel safety valves. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure.

Control Devices ST Series Brass ASME Safety Valve, 150 psi Set Pressure, 1/4" Male NPT #ad - Asme safety rated with UV and NB marks. This control devices st25-1a150 asme safety valve has a brass body, a 1/4" male NPT threaded inlet connection, a 150 psi relief pressure, and a stainless steel pull ring for manual pressure relief. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit.

More information about Control Devices ST25-1A150 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-160 psi, 2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ805R1 #ad - 1/4" male npT threaded inlet connection. 250 degrees f maximum temperature for use in high temperature applications. The ot58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. Vacuum/bar. Vacuum/kPa/Hg.

Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids.

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-160 psi, 2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. The dial is white aluminum with black and red markings. Brass construction and stainless steel spring for corrosion resistance. The circular dial comes in 1. 5" 40 mm, 2" 50 mm, 2. 5" 63 mm, or 4" 100 mm diameters and is filled with glycerin for protection against vibration and pulsation.

Brass wetted parts for measuring non-corrosive liquid and gas pressure.

More information about Winters PFQ805R1 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-15 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ800 #ad - All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range. Winters instruments manufactures pressure gauges, thermometers, diaphragm seals, pressure transmitters, and switches.

Asme safety rated with UV and NB marks. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. The dial is white aluminum with black and red markings. The operating temperature is -4 to 150 degrees F -20 to 65 degrees C. The 6" 150 mm socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal.

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-15 psi/kpa,2-1/2" Dial Display, +/-1.5% Accuracy, 1/4" NPT Bottom Mount #ad - 1/4" male npT threaded inlet connection. Brass wetted parts for measuring non-corrosive liquid and gas pressure. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. This pressure gauge is suitable for pumps, hydraulic presses, pneumatic equipment, compressors, machinery, and motors in harsh environments.

Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. For instance, gauge pressure measures pressure relative to ambient air. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg.

More information about Winters PFQ800 #ad


Similar products



PIC Gauge S201L-254G 2.5" Dial, 0/200 psi Range, 1/4" Male NPT Connection Size, Bottom Mount Single Scale Glycerine Filled Pressure Gauge with a Stainless Steel Case, Brass Internals, Stainless Steel Bezel, and Polycarbonate Lens

#ad
#ad
PIC Gauges S201L-254G #ad - Liquid Filled. 1/4" male npT threaded inlet connection. 250 degrees f maximum temperature for use in high temperature applications. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Relief pressure preset to 150 psi with flow rate of 136 cfm. Stainless Steel Case and Bezel. Phosphor Bronze Bourdon Tube.

PIC Gauge S201L-254G 2.5" Dial, 0/200 psi Range, 1/4" Male NPT Connection Size, Bottom Mount Single Scale Glycerine Filled Pressure Gauge with a Stainless Steel Case, Brass Internals, Stainless Steel Bezel, and Polycarbonate Lens #ad - Vacuum/kPa/Hg. Vacuum/bar. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Vacuum/bar. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2. 5" 63 mm and 4" 100 mm gauges. Display accuracy is + or - 2.

5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2. 5" 63 mm and 4" 100 mm gauges. Asme safety rated with UV and NB marks.

More information about PIC Gauges S201L-254G #ad


Similar products



Square D by Schneider Electric 9013FHG52J59M1 Air-Compressor Pressure Switch, 175 psi Set Off, 40 psi Fixed Differential, 1/4" NPSF Internal, Auto/Off Cut-Out Lever

#ad
#ad
Schneider Electric 9013FHG52J59M1 #ad - Maintained manual cut-out lever has auto and off positions. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Phosphor Bronze Bourdon Tube. Diaphragm Actuated. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Vacuum/bar. Liquid Filled. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.

250 degrees f maximum temperature for use in high temperature applications. Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. The switch is diaphragm actuated and has a fixed differential. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice.

Square D by Schneider Electric 9013FHG52J59M1 Air-Compressor Pressure Switch, 175 psi Set Off, 40 psi Fixed Differential, 1/4" NPSF Internal, Auto/Off Cut-Out Lever #ad - Relief pressure preset to 150 psi with flow rate of 136 cfm. Brass internals and Connection with built in snubber. The threshold, or setting point, upon rising adjusts with a screw nut. Stainless Steel Case and Bezel. The maintained manual cut-out lever has auto and off positions. Asme safety rated with UV and NB marks.

More information about Schneider Electric 9013FHG52J59M1 #ad


Similar products



Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-200 psi/kpa, 2" Dial Display, +/-2.5% Accuracy, 1/4" NPT Bottom Mount

#ad
#ad
Winters PFQ2465 #ad - The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Vacuum/kPa/Hg. For instance, gauge pressure measures pressure relative to ambient air. Liquid Filled. Brass construction and stainless steel spring for corrosion resistance.

Vacuum/bar. Brass wetted parts for measuring non-corrosive liquid and gas pressure. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2.

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-200 psi/kpa, 2" Dial Display, +/-2.5% Accuracy, 1/4" NPT Bottom Mount #ad - 5" 63 mm and 4" 100 mm gauges. The winters pfq series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1. 5% or 2. 5%. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.

More information about Winters PFQ2465 #ad


Similar products



Control Devices ST Series Brass ASME Safety Valve, 200 psi Set Pressure, 1/4" Male NPT

#ad
#ad
Control Devices ST25-1A200 #ad - 250 degrees f maximum temperature for use in high temperature applications. Stainless Steel Case and Bezel. Pressure Switch used to control electrically driven motors. Vacuum/bar. Vacuum/kPa/Hg. 250 degrees f maximum temperature for use in high temperature applications. Vacuum/bar. This safety valve is american society of Mechanical Engineers ASME safety rated and displays the UV mark for pressure vessel safety valves.

Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2. 5" 63 mm and 4" 100 mm gauges. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit.

Control Devices ST Series Brass ASME Safety Valve, 200 psi Set Pressure, 1/4" Male NPT #ad - Phosphor Bronze Bourdon Tube. Pressure switch - Water or Air. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Relief pressure preset to 150 psi with flow rate of 136 cfm.

More information about Control Devices ST25-1A200 #ad


Similar products



DEWALT DW4906 8-Inch Crimped Bench Wire Wheel, 5/8 Arbor, Medium Face, .014-Inch Wire

#ad
#ad
Dewalt DW4906 #ad - Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Vacuum/bar. 250 degrees f maximum temperature for use in high temperature applications. Asme safety rated with UV and NB marks. Brass construction and stainless steel spring for corrosion resistance. The dw4906 is most compatible with 5/8-inch arbor and functions at 4, 000rpm.

Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Strict specifications are applied to the design and designed to ensure they maintain a competitive higher than standard wire count. Vacuum/bar.

DEWALT DW4906 8-Inch Crimped Bench Wire Wheel, 5/8 Arbor, Medium Face, .014-Inch Wire #ad - Liquid Filled. Plastic Lens. Brass wetted parts for measuring non-corrosive liquid and gas pressure. Maintained manual cut-out lever has auto and off positions. Relief pressure preset to 200 psi with flow rate of 178 cfm. Excellence is assured with strict standards and a full assessment to ensure the standards are met.

Best used for moderate jobs, smoothing a weld, including deburring, dislodging rust, and prepping a surface.

More information about Dewalt DW4906 #ad


Similar products



Good Year 12674 Rubber Air Hose Red, 50-Feet x 3/8-Inch

#ad
#ad
GRIP (GRAND RAPIDS INDUSTRIAL PRODUCTS) 12674 #ad - Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice. Diaphragm Actuated. Liquid Filled. Spiral synthetic yarn reinforcement. Class c oil resistant EPDM rubber cover. Solid brass 1/4" NPT end fittings. Spiral synthetic yarn reinforcement. Asme safety rated with UV and NB marks.

Measures pressure with single psi or dual scale psi/kPa/psi/bar/Hg. Vacuum/bar. Asme safety rated with UV and NB marks. 250 degrees f maximum temperature for use in high temperature applications. Class c weather, oil, and solvent resistant outer coating. Vacuum/kPa/Hg. Vacuum/kPa/Hg. Brass wetted parts for measuring non-corrosive liquid and gas pressure.

Good Year 12674 Rubber Air Hose Red, 50-Feet x 3/8-Inch #ad - 1/4" male npT threaded inlet connection. Vacuum/kPa/Hg. Relief pressure preset to 200 psi with flow rate of 178 cfm. Maintained manual cut-out lever has auto and off positions. Display accuracy is + or - 2.

More information about GRIP (GRAND RAPIDS INDUSTRIAL PRODUCTS) 12674 #ad


Similar products



Air Compressor Pressure/Hydraulic Gauge 2.5" Face Back Mount 1/4" NPT 0-200 PSI

#ad
#ad
made in usa #ad - Maintained manual cut-out lever has auto and off positions. Vacuum/bar. Excellence is assured with strict standards and a full assessment to ensure the standards are met. Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance. Brass wetted parts for measuring non-corrosive liquid and gas pressure.

Asme safety rated with UV and NB marks. 250 degrees f maximum temperature for use in high temperature applications. Display accuracy is + or - 2. 5% of full scale value for the 1. 5" 40 mm and 2" 50 mm gauges, and + or - 1. 5% of full scale value for the 2. 5" 63 mm and 4" 100 mm gauges. Vacuum/kPa/Hg. Lower mount or center back male connection with 1/8", 1/4", or 1/2" NPT rate with restricted orifice.

Air Compressor Pressure/Hydraulic Gauge 2.5" Face Back Mount 1/4" NPT 0-200 PSI #ad - One new 0-200 psi back mount air compressor pressure gauge. Phosphor Bronze Bourdon Tube. Vacuum/kPa/Hg. Brass construction and stainless steel spring for corrosion resistance. Liquid Filled.

More information about made in usa #ad


Similar products